TCP Global Gravity Feed Sand Blaster Gun Kit - Hand Held Sand Blasting Spray Gun with 2 Ceramic Nozzle Tips and Air Regulator - Blast Abrasive Media, Soda, Bead, Walnut, Aluminum Oxide - Pneumatic

Doesnt work.

Worked well for dry soda blasting of aluminum carb and engine parts.

El acople del m as montero no tiene la misma rosca, por lo tanto no se puede instalar

I purchased it to strip a 1911 Im refinishing. Besides the media flow valve being a bit finicky, it performs very well and doesnt chew through a ton of material. The air pressure control fit unlike a lot of comments that said it didnt. Although Im not sure how accurate it is.

Works great for small jobs.

WORKS GOOD,,,MUST REFILL OFTEN !

Very weak

Regulator and gauge are not a compatible thread and dont fit the gun

First off; I have never used a sand blaster before. I bought this to clean carbon and stains off the exterior of aluminum small engine cylinders. I bought a box of #10 (very fine) glass beads to try with this blaster. I have a 25 gallon compressor and it had no problem supplying enough air for this small task. I must say, this blaster and the #10 glass beads worked excellent. It didnt damage the cylinder, but cleaned it very quickly to like-new condition. And I only used about 1/2 of the hopper to do 1 cylinder. The blaster itself was easy to assemble. The regulator attached with no issues, and I attached a standard air fitting using some teflon tape to the regulator - also with no issues. I found I only needed to turn the hopper valve on half way to supply enough blast media to do the job. I also found that the fine glass beads with drain out of the hopper just by gravity if the hopper valve is fully opened. As for PPE - I wore an N95 mask, safety glasses and a full face shield. That seemed to be adequate for the job I was doing. I did the blasting in the front lawn as I didnt want that fine blast media anywhere near the house. I used so little that there was no trace of it on the lawn when I was finished. For my purposes, this blaster gun is excellent and I highly recommend it for occasional cleaning of small parts.

Trabaja muy bien y no necesita mucha presión de aire como otras pistolas. Además es práctica de usar, por su bajo costo a comparación de otras. Da buenos resultados