Snappy Tools Plug Cutter, 3/4

I cut 10 plugs in 3/4 hard red oak flooring to plug some 3/4 holes in my floor. Max plug depth is about 0.50 with the cutter all the way down. Some burning of the oak can be seen in the pictures which I was unable to avoid with any speed or cut pressure. Best performance was at 450RPM and light feed pressure. These plugs were cut with a table saw at 0.47 long. The tool produces a tapered plug with a slight radius at the small end to aid in insertion. Small diameter is 0.742, large diameter is 0.762. This produced a good interference fit into a 0.75 hole. the tool seems well made and other than the slight burning, performed very well. For comparison, I cut a straight walled 0.745 plug using my CNC router and .125 bit. I ended up using the tapered plugs.