Single Mode LC Gigabit Fiber Media Converter - Includes LC SFP 20 km (12.42 Miles) LC – to UTP Cat5e Cat6 10/100/1000 RJ-45 – Auto Sensing Gigabit or Fast Ethernet Speed - Jumbo Frame - LLF Support
-
Wade
> 3 dayNothing to dislike about the item this is a well made product, the mounting holes on the two rails could have been better positioned to make it item mountable inside structured boxes like Leviton, On-Q etc .
-
will
> 3 dayExactly what I needed!
-
ziggy
> 3 dayReasonable cost way to terminate a fiber line into existing ethernet gear
-
Brian Gorenflo
> 3 dayVery easy to install & already come with the GBIC modules! Perfect for converting LC fiber runs in to Ethernet hand-off for your network.
-
Jaymann55
Greater than one weekonly complaint is print is small to see tx and rx ports
-
Sares Kay
> 3 dayI have been running fiber up towers 200 to 400 feet, for my M5 radios, these are great, down side they are 5 VDC, not a real problem just split the POE going to the antenna (24VDC) tap it and put it through a power regulator (5VDC) your set on top.
-
Michael Brock
> 3 dayIt was pure plug-n-play. Excellent product.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| LC Single Mode Gigabit 20km (12.24 mi) Built-In Fiber Module Media Converter | SC Single Mode Gigabit 20km (12.24 mi) Built-In Fiber Module Media Converter | Dual AC+DC LC Single Mode Gigabit 20km (12.24 mi) BuiltIn Module Media Converter | Single Mode LC WDM Bi-Di Single Fiber Gigabit Built-In Fiber Module Converter | PoE Single Mode LC 1310nm 20km (12.42mi) Power Over Ethernet Fiber Converter | Din Rail Industrial Mini Type Single Mode Single Fiber WDM SC Media Converters | |
| Speed | Gigabit | Gigabit | Gigabit | Gigabit | Gigabit | Universal: Gigabit / Fast Ethernet |
| Autosensing to 10 / 100 / 1000 Mbit/s | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Fiber Type | Single Mode | Single Mode | Single Mode | Single Mode (1 fiber - Single Strand) | Single Mode | Single Mode (1 fiber - Single Strand) |
| Fiber Connector | LC | SC | LC | LC | LC | SC |
| Wavelength | 1310nm | 1310nm | 1310nm | 1310/1550 nm A-side | 1550/1310nm B-side | 1310nm | 1310/1550 nm A-side | 1550/1310nm B-side |
| Power Supply | AC adapter in set | AC adapter in set | AC + DC dual power input | AC adapter in set | AC adapter in set | 9 - 55 VDC (AC adapter in set) |
| Maximum Reach | 12.24 miles (20 km) | 12.24 miles (20 km) | 12.24 miles (20 km) | 12.24 miles (20 km) | 12.24 miles (20 km) | 12.24 miles (20 km) |
| Size | 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) | 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) | 30mm (H) * 110mm (D) * 140 mm (W) / 1.18 in (H) * 4.33 in (D) * 5.51 in (W) | 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) | 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H) | 60* 50* 35 mm (2.36* 1.96* 1.37in) (L*W*H) |
| DIN rail support | ✓ | |||||
| PoE/PoE+ PSE Output | ✓ |
Plug-n-Play Solution to Extend Ethernet over Single Mode Cables up to 20 km (12.42 miles) –High Performance 1310nm Wavelength SFP module pre-installed
Extend your Gigabit or Fast Ethernet Network Over Single Mode Fiber Up to 20 km (12.42 miles) using 1310 nm With Ease
AN-UM-SMC-AS-J+SM-SFP-KIT Single Mode Fiber Media Converter Will Automatically Detect 10 Mbit/s or 100 Mbit/s Fast Ethernet or 1000 Mbit/s Gigabit port -
You just need plug in the cables and it will work right away!
Powering it up?
Easy, it will come with an AC power adapter in the set, just plug it in!
Sturdy, Stable, and Easy To Use
- Supports Jumbo Ethernet Frames up to 9000 bytes (if needed, configurable by dip switches);
- Supports QinQ and VLAN"s - MTU size big enough to pass them through;
- One 1000Base-LX Single Mode Dual Fiber port Port with LC type connector - up to 20 km (12.24 miles) distance using 1310 nm wavelength
- One 10/100/1000Base-T RJ-45 port Autosensing featured - adapts to all 3 speeds!
- Compliant with IEEE 10/100/1000Base-T and 1000Base-LX
- Connect it to Gigabit or Fast Ethernet ports or even 10Mbps ports
- When used standalone (paired with other devices), be sure to check that wavelengths match - 1310 nm used in these converters.
Versatile Protocol & Features Support
- Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
- Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-LX
- Transmission Wavelength – 1310 nm, Fiber Connector Type: LC
- Power supply: 100 to 240VAC 50 to 60Hz, US type power plug
- Dimensions: 70.5mm - 2.77in - (L) X 94mm – 3.7in (W) X 26.5mm – 1.04in (H)
- Environment: Relative humidity; 5% to 90%
- Operating temperature: 0 to 70 degree Celsius (32 - 158 F)
- Supports LLF feature - Link Loss Feature - (if needed, configurable by dip switches)
- Supports Jumbo frame (if needed, configurable by dip switches)
More Features, More Convenience and Peace of Mind!
Setup of these units are really easy as the 3 steps shown in picture gallery - all default settings will work for all of your cases, but if you can turn on/off LFF feature or Jumbo frame - do it!
While in most cases you will have LAN switches, WiFi routers, or regular PC"s connected to media converter UTP port - this versatile converter will still work with any standard Ethernet port device!
Scale Up Your Network as You Grow!
Autosensing10/100/1000 Gigabit Ethernet port auto adapts to Fast Ethernet speed device as well.
BONUS!
+ you get free wall mount ears and rubber buttons in set!
