SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 3/8” Thick (10mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

I used this piece of acrylic as a top to a homemade router table. Given its relatively inexpensive price I has concerned about how it would hold up to some basic cutting and drilling. To my surprise, not only were the dimensions accurate enough for my application, but the sheet did not crack or chip on the table saw, plunge router, or hand drill. The icing on the cake was that the masking peeled off in one smooth sheet with no adhesive residue left behind. Couldnt be happier with this purchase.

Used the 3/8 acrylic to make a new router subbase. Was easy to cut and clean up the edges. Just remember to predrill any holes you want and to let the tool do.the work to avoid any cracking.

The sheet was delivered very well protected. The edges are clear as the top and bottom. I have used a lot of Acrylic in my career and was very happy that when I needed a small piece for personal use that I got what I paid for.

Arrived in a timely manner and was exactly as advertised. Used for painting. The product arrived well protected and in great shape, there is a protective paper on both sides of the panels.

I used this to make a giant base plate for my router. It involved drilling about 40 holes. The plexiglass held up well without cracking and seems very sturdy when complete. There seems to be no bow in the plate even when holding the weight of my router. Great for lots of projects where you need sturdy and see-through.

Used it to make a router base.

Even though I knew the thickness when I ordered it, this is one thick piece of acrylic! As others have said, the edges are very clean and its very sturdy. It also comes coated in paper on both sides to protect it. Crystal clear as well. I make many woodworking jogs and fixtures, so this will come in real handy. The price is not bad either. Gladly recommend.

I made my own lightbox and this is way cheaper, and much lighter than using a glass. When I ordered a customized size of glass, it took me two months to get it due to small quantity of order volume. You can have this within 2-3days and cut it by using a table saw.

Bought this for the plate on my homemade router table. It came exactly as described (12x12) and will ensure my router doesnt sag in the table since it is 3/8 thick. Looking forward to spending the winter building things in my garage!

Worked perfect for my router project.