SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

Just what I needed

Plastic shavings got everywhere.

Muy facil de usar. Lo usamos para poner los botones del campervan que estamos haciendo. Nos encanto el resultado.

Arrived in excellent condition. Packaged extremely well by shipper and as well by vendor. Quality piece of acrylic -as acrylic goes. No scratches. Protective adhesive backed paper on both sides; inside bubble wrap sleeve; inside form fit box; inside large box with inflated packing material. Will use as reflective base for product photography.

Bought a 12 x 12 x 1/4 sheet of acrylic to make new foot plates for my trim router as the original factory foot plate is too basic and its center hole is too large for standard guide bushings to be fitted. The sheet arrived well-packaged in bubble wrap inside a form-fitting box inside a larger Amazon box, which also contained some Forstner drill bits I needed for this project. It measured 1/16th under the 12 inches on both sides. I assume that the original large sheet is marked at exactly 12 inches and the cutting blade running along that line has a width of 1/8. Hence the loss of the 1/16th inch per cut sheet. Not an issue for my project, but would be if someone wanted exactly 12 square. The brown paper protection was ideal for marking out the sheet and it was left in place until all cutting, sanding and drilling was completed. I was able to power sand the acrylic up to the lines on the paper without the paper coming loose or fraying. The acrylic cut cleanly with my table saw (40 TPI), jig-saw and it was center-punched and drilled cleanly on my drill press (1700rpm) without cracking or melting. In conclusion, I do not hesitate to recommend this product.

They turned out great! I laser engraved and cut them into medallions for a upcoming dog show

I bought the 1/4 tinted plexi, and it was perfectly cut and packaged. I shaped it with a wood cutting blade (slowly), and it cut easily with no shards or melted edges.....somehow. I then filed the edges to a rounded shape, no problem. I drilled the mounting holes with actual plexiglass drill bits, but possibly could have gotten away with using regular twist drill bits in a drill press (sometimes they can grab and split plexiglass. This was a very substantial piece of tinted plastic and makes a great sun visor for me.

For the small job that I have it worked well.

As advertised and depicted. Quality. I drilled a hole for a little knob and use as a windscreen for my solar coffee maker.

I ordered the black version of this sheet, its definitely pitch black and very sleek~ It feels bad calling this a mere sheet, it is quite thick but not to the point where its heavy (held in my hand). It needed to be cut and rendered into a palette that wouldnt bite of course, and the process was nice and easy with no snapping or anything. Just some cutting and sanding and it was all done in 10 minutes The palette loves to eat dust or something, but thats alright, its not the sheets fault I dont think. Scratches pretty easily. These are simply puny scratches from a palette knife, so I will no longer be abusing my palette with a knife. I absolutely love the end product though,, and Im sure the problems I encounter are due to the fact that I transformed the sheet into something meant for more than display