President Electronics WALKER II FCC AM Transceiver CB Radio, 40 Channels AM, Channel Rotary Switch, Volume Adjustment and ON/OFF, Manual Squelch and ASC, Multi-functions LCD Display
-
Tejas Legend
> 3 dayExcellent with superior build quality. When combined with a quality antenna, talks great straight out of the box. Best warranty too.
-
Ubangie
> 3 dayGreat radio and built sturdy with a large heat sink. Great features and better than the Cobra line of radios IMO.
-
kdm
> 3 dayThis is a great radio. Full of useful features, and simple to use. The auto SWR is a really nice touch. Very good receiver and picks up lots of skip when it’s around. Can be a bit staticky but that’s in my car so just turn the receive gain down a bit and it’s all good. Even in the brightest sun you can still read the display. Paired with a good antenna this is a fine radio.
-
Ney
Greater than one weekSimple and always works best radio in 15 years I haber ever owned
-
anthony
> 3 dayNice radio
-
Andrew
Greater than one weekGreat radio. Shipping time was to be expected. Showed up on front porch in factory box clearly advertising what it was. Not a problem unless you have package thieves. Paired it with a 3’ fire stick antenna mounted in left front stakehole on pick up bed with 1.6 - 1.8 SWR on channel 1 and 40. Alternately, I paired it with a 5’ Wilson 1000 magnet mount, SWR 1.3 to 1.4 . Both done with external SWR meter. Checked with 2 different meters. Same numbers. The internal SWR in radio shows a bit higher than external one, So I went with external meters for final tune. As to be expected, Radio really gets out with the 5’ Wilson on top of cab. Does ok with the 3’ one. Clearance being the issue with 5’ one.
-
Robin S.
> 3 day$30 radio bad made
-
sirbuysalot
> 3 dayI like this cb radio. You have the right features to work with. I like the scan, weather and RF power adjustment the most. The mic has channel up/down and also activates the scan feature. I can adjust the dead key from about .5-3.5 watts by my meter with the RF power. Ive found about 4 oclock setting is good for my mic gain. The ASC is new to me, I may use that feature more when I get better confidence in It. The RF gain is really smooth and works well. You do need a separate SWR meter to match it.
-
T
> 3 dayAwesome add to the collection talks great ,hears great
-
John T. Stanton
Greater than one weekUnit follows the bells and whistles theory of marketing, most of which are generally cosmetic and really useless. This unit will actually measure SWR, a feature I was more than a bit skeptical about..surprise! It worked and agreed with a good SWR meter.