OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Khaled Q
> 3 dayWorks perfectly..
-
cichlid
Greater than one weekWorked perfectly. Easy to install. I could have used a picture or two so I could telll what side faced up.
-
Damian Medhurst IV
> 3 dayAs advertised
-
L
> 3 dayI installed my 2.5 ssd to my Mac Pro 4,1->5,1 working great!
-
Johnathan Ilac
> 3 dayWorks perfectly as intended. No issues with installation.
-
Dan Bach
> 3 dayUsed if in my 2012 Mac Pro. I purchased it to mount a full-size hard drive and it lacked the second set of screw holes to mount the drive. I ended up using gaffers tape for stability.
-
Kluntor Boogie
> 3 dayPerfect fit for my 09 Mac Pro . With these sleds were $9.99 instead of $17.50, but at least they arent the $20 rip off that Mac users sell the oem ones for
-
steve o
> 3 dayQuality aluminum bracket on par with original apple drive sleds for 3.5 fit SSD right into old drive slot. of course a 500mb/sec SSD will only get 300mb/sec in the built in slots, but good enough for some purposes where max speed isnt critical.
-
mark oliver
> 3 dayMuch more efficient for my Mac Pro desktop
-
mike
> 3 dayIve seen the price fluctuate between 20-50 bucks. The high price is fine, but its steal at $20. Theyre the best option by far for SSDing all up in your Mac Pro.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
Related products
