Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Dominic White
> 24 hourKeeps my 5.0ghz overclocked cpu at 60 degrees c max.. Top cooler
-
Fabio
> 24 hourÈ il top del settore, facilissimo da montate e dalle grandi performance.
-
Jewel Ebert
> 24 hourNot bad
-
Bochie
> 24 hourGreat cooler. I havent done an extensive overclock on my r7 2700x but so far Ive gotten further with my oc using this. I went up to 42.5 with ease from 40.0 I didnt add adjust the voltage from where I have it at though but I do know that before this NH-15D anything other 40.0 at the voltage I have set wouldnt be possible. I just need to either get a bigger case or get a Noctua 120mm fan. My ram is a little too high with the rgb on it and I cant close my case so Im going to change one of the fans first to see if that helps. All in all this is a great cooling system and I dont hear the fans enough to pay attention to the sound because they are very quiet..
-
svtcontour
> 24 hourA bit expensive but an Epic cooler!
-
Fadaboey
> 24 hour6yr warranty on all parts is a big plus. Premium build quality! Ultra quite! I got my i7 6700k at 4.6ghz stable with max 72°c at stress testing!.
-
Kenneth Bui
> 24 hourInstallation was dead simple. Noctuas mounting system is probably the best in my opinion relative to other brands.
-
Mothman
> 24 hourI love NOCTUA products and leaving a one star is hard for me to rate but in this case someone at Noctua is asleep on their job and not supplying all the parts or verifying! ☹
-
S. Seaney
> 24 hourThese fans are EXTREMELY quiet. I used them in a larger server build that sits next to my desk; they really are whisper quiet.
-
Ilya Nemtsev
> 24 hourFantastic cooler! I replaced Corsair H115i with this cooler and my gaming temps went down from 55-58C to 44-46C. Under prime95 temps hovered around 55-58C. CPU 6700K @ 4.2GHZ. The installation is a bit laborious, probably equally laborious as installing the H115i, but the instructions were clear and I had no problems. Size of this thing is pretty crazy (check out the pics), Corsair 750D fits no problem, but I would worry if I had a standard mid tower, better to check compatibility online. Noise is lower than H115i by about 25%. I am very satisfied with this coolers performance, from the packaging to the cooler itself, quality is felt throughout.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
Related products
