Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)
-
ian long
> 3 dayGot this as an upgrade for my Evercool 5.25 drive bay. Moves more air at lower db with and is a better quality build overall. Hard to beat Noctua.
-
prinzeetz
Greater than one weekGood
-
Zachary
Greater than one weekAbsolutely silent when using the noise reduction adapter. This does reduce the airflow and increase temperatures slightly. This comes with rubber screw replacements, but they often break, just use the screws.
-
Zzyzx Oh
Greater than one weekLove these fans although they do not blow you away. They are silent and rarely spin up enough for to be heard. Great quality.
-
Austin Smith
> 3 dayGreat fan, and very quiet. I am using this as a replacement for a heatsink fan and it is whisper quiet while keeping things well cooled. One note, be careful if trying to use this with Dell (and possibly other OEMs), as Dell uses a thin 5 pin Motherboard connector that you will have to buy an adapter to get this to work with.
-
Phillip
28-10-2024I purchased these to replace some stock fans. They’re super quite and are easy to install. These are by far my fan of choice
-
bill
> 3 dayI dont remember which one this was for, but I replace all fans on computers etc with Noctua.
-
Brian V.
Greater than one weekInstalled this under the Swiftech MCP 35x2 heatsink and it works great. Theres not much clearance at all, but it does a beautiful job at cooling the pumps. PWM is a plus, and very quiet.
-
Paul W.
> 3 dayIt hasnt died or started squeaking, chirping or making any unusual noise. It runs relatively quiet for the expected amount of airflow. It does have onboard RPM sensors. Made a little bit of electrical interference noise running PWM, but works fine in DC. Chocolate Brown and Beige doesnt exactly match the black PCB and interior of my case, but may look right at home in your 80s performance build with a 5.5 Floppy. It does the job.
-
Fabian
> 3 dayIll keep it short: my computers stock fan was so loud, it was making the whole pc tower vibrate and caused a massive amount of noise. I can still remember the vibrations from my legs and arms making contact with the desk. I finally got tired of it and ordered this fan. It took about a minute to install and turn it on and that was that. No more noise. Its like its not even on. If I hadnt seen the blades spinning, Id think I got a dud. It also keeps the PCs temperatures far lower than the stock fan. All I can say is that Ill never go back to regular fans. Its that good.
The NF-A8 is a highly optimised, premium quality quiet 80mm fan. Featuring Noctua’s AAO (Advanced Acoustic Optimisation) frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A8 further improves the renowned quiet cooling performance of the award-winning NF-R8. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 2200 to 1750rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
Flow Acceleration ChannelsThe NF-A8 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. |
SSO2 bearingThe NF-A8 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
Integrated anti-vibration padsIntegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems. |
Scope of delivery
|
Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NF-A8 PWM | NF-A8 FLX | NF-A8 ULN | NF-A8 5V PWM | NF-A8 5V | NF-A8 PWM chromax.black.swap | |
| Connector | 4-pin PWM | 3-pin | 3-pin | 4-pin PWM | 3-pin | 4-pin PWM |
| Voltage | 12V | 12V | 12V | 5V | 5V | 12V |
| RPM | Max: 2200 / Min: 450 | 2000 | 1400 | Max: 2200 / Min: 450 | 2200 | Max: 2200 / Min: 450 |
| RPM with L.N.A. | 1750 | 1650 | 1100 | - | - | - |
| RPM with U.L.N.A. | - | 1200 | - | - | - | - |
| Acoustical Noise | 17,7 dB(A) | 16,1 dB(A) | 10,4 dB(A) | 17,7 dB(A) | 17,7 dB(A) | 17,7 dB(A) |
| Acoustical Noise with L.N.A. | 13,8 dB(A) | 12,9 dB(A) | 6,5 dB(A) | - | - | - |
| Acoustical Noise with U.L.N.A. | - | 7,9 dB(A) | - | - | - | - |
| Size | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm | 80x80x25 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige | Black with swappable coloured anti-vibration pads |
Related products
