NAMCIM Wireless HDMI Transmitter and Receiver, Designed only for Laptop and PC, Plug & Play, Wireless HDMI Dongle Adapter for Streaming Video/Audio from Laptop/PC to HDTV Projector

Picture on the computer was good but occasionally seemed to smear on the TV. Has a short range and lost picture when moved 20 away. Failed completely in the middle of the game. I replaced the wireless device with a cable and had no further issues. They are so proud of the device they didnt put a label on it.

Works like a charm

Comes with every cable and plug needed, which was very nice. But, no matter what I tried, I could not eliminate the jitter. My configuration involved Apple TV (50Hz and 60Hz at 1080), a soundbar, and a projector. Distances were about 20 feet. 1. I tried going direct from Apple TV to the transmitter. 50Hz gave the least jitter, but it was still there. 2. I tried Apple TV to soundbar and soundbar (HDMI out) to transmitter. Jitter, same as above. 3. I tried Apple TV to an HDMI splitter, and one output to the projector and the second to the soundbar (using the transmitter to receive audio). This actually worked flawlessly while watching a movie one night. However, the next day it didnt work because the transmitter seemed to steal both the video and the audio in the splitter, so the projector never had a signal; I couldnt figure it out and tried everything for about an hour! I wanted the Apple TV and soundbar together because I have better performance when the Apple TV is plugged into my LAN rather than using WiFi. But the jerky picture using the transmitter was a deal breaker for me. I have TWO different transmitters, and they both have the exact same issues with jitter, especially at 60 Hz.

No cables! Easy plug and play. Great if you want a portable device or if you want to set up another screen and not have to run wires. Works just as well as having a cable plugged in. From what Ive tried, no issue with audio or video synchronization.

For those of you who hate exposed cables as much as I do, this is the neatest solution around. if you have a DVR, old bluetooth player, etc and dont want them sitting exposed right by your TV, this allows you to put them in a closet and connect wirelessly. Also, we sometimes like to connect a laptop to the TV with HDMI, so again, can just do that from the couch instead of having to put the laptop on a chair so its close enough to be connected with a cable. Super convenient, and worth the significant price tag in my opinion.

It’s like Bluetooth but better. Got this for presentations. Instead of having to try to figure out our clients hookups I am able to just plug this in. Most TVs have an available USB & HDMI. So good so far!

This works just as you could hope. No wires needed. I can broadcast whatever’s on my laptop to a monitor without the limitations of a long cable! The quality is great. I have no issues with lag or delay when broadcasting video. The only thing is I have to remember to grab the receiving unit from the monitor once I’m done teaching my class!

Takes a while to figure out how to configure this thing. Once we finally got it working it seems to work fine. There is a little lag but that may be the internet dont know. I have used it with ipad hp laptop roku tv and apple tv with out any issues.

The item works good, but the manual is not specific about how to use it… also the worst delivery that I ever had, delated, tracking not accurate…

The setup of this could not be any easier. Plug in receiver to TV HDMI and USB. Plug transmitter nto PC using HDMI or USB-C. Change HDMI to appropriate slot. Youll see a blue screen with directions. Using a paperclip, on the bottom of the receiver hit the reset button for a 5 seconds. Then go to transmitter and press and hold button to pair- once paired, connect to TV under your settings with the designated letters/numbers clicking connect to display. It works using the TV sound as well so you dont need outside speakers.