Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Thefireball
> 24 hourThe only thermal paste Ive ever used.
-
Sharon K Hornback
> 24 hourThis is the best thermal paste I have used I have used this stuff for years
-
Jonathon Wilson
> 24 hourEasily enough for 3-4 CPUs. Fast shipping. Good CPU temps with little compound. Replaced the stock paste on my Ryzen 3 1200 and OCed from 3.1 to 3.8 GHz and runs stable. Highest record temp when running Prime95 was 61C on stock cooler with 26C ambient temps.
-
Denise C
> 24 hourNo comment
-
Rus
> 24 hourHelps keep my cpu cool quite reliably
-
Ryan Robinson
> 24 hourIts a good product to add to the top of your processor. Not good spread on toast. DONT PUT ON TOAST!
-
Jonathan Degen
> 24 hourWorked exactly as it needed to, would buy again if I need more
-
martin042068
> 24 hourEasy to use and spread. Keeps my Ryzen cool.
-
Vaughn
> 24 hourA little smaller than I thought it would be.
-
Amber Stokes
> 24 hourA thick paste which I had to spread thin with the little plastic spreader tool. No lumps or chunks in it.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
