Maxfree T2 Triple Portable Monitor for Laptop, 13.3 1080P FHD Dual Monitor, One Cable Plug and Play Laptop Screen Extender for Mac/Windows, Support M1/M2 Chip MacBook Monitor for 13.3”-17” Laptops

For the most part, this is a great unit. The materials are good and everything is robust and strong. The part that attaches to the laptop works very well and the kick stand in the back is also equally as good. Everything is easy to use also, including the OSD menu. The only negative I can see is the brightness. Even with backlight set to 100% you get maybe 200 nits to 250nits max. This is comparing with the 300nit screen my laptop has. Also a a slight aesthetic dislike is the huge max logo on the front. It is huge and I am not a fan of large branding like that. It is a good unit and will satisfy most people needing something like this.

If you don’t want to read the whole review the bottom line is I still think it’s much easier and elegant to buy two separate portable monitors that stand up by themselves but fold very flat and are less bulky and easier to carry. You will have to plug two things in instead of one but there’s a good chance you’ll need to cables anyway. My laptop wasn’t able to supply enough power to both monitors so I had to use both USB cables. The image quality just isn’t there. I found myself being much more distracted by the difference and the screen brightness and saturation and image quality then really being able to focus on what I was doing on the computer. They are clearly using very low in panels for each side of this thing because they look exactly like the entry-level portable monitors that look like tablets that you can buy. As opposed to a higher end portable monitor, which is much more likely to match your laptops screen. And even at that higher price, purchasing two of them will come in about the same price as this thing . I spent a lot of time fiddling with the adjustments and I just couldn’t get a picture that would come close to the native image that my laptop produces. The thing is heavier weighs about 4 pounds and that’s a lot of weight to put on your fragile laptop hinges. So unless you have a huge beefy thing I really wouldn’t want these monitors hanging off my laptop screen. Once you set up there’s very little difference between just setting them on the table and having them mounted to the side of your laptop. As an overall package this thing is more bulky than to slim portable monitors. So given the price I find it hard to justify this even if it was comparable in image quality. A set up with portable monitors and comparable viewing quality would cost you half of what they charge for this. Even less than half. The one advantage this has is that you can power and send the signal to both monitors if you have a very new laptop. But I think it only works on windows and it doesn’t run through the GPU. So if you have a gaming rig or some thing you’re not going to get the advantage of your GP as graphics processing, as this is software driven that goes through USB. In the end it’s a very expensive solution that I think causes more issues than it solves. And the ones it does solve, you can solve for much less money. It may not be as flashy looking but you still end up with three monitors on the table. And significantly less bulky to carry around. This thing is quite clunky. With my portable monitors it’s just like carrying two large tablets with my laptop. If you are determined to get a one piece solution then I guess this could work for you. It does work although it uses a software solution that I am unfamiliar with. They include the driver. But for me this includes unnecessary weight and bulk and potential risk to your laptop screen.

Ive been using the Maxfree T2 Triple Portable Monitor for Laptop for only a short while, but Im already really impressed with it. Its a great way to add two extra screens to your laptop, and its much more convenient than buying a second (or third) monitor. The build quality of the Maxfree T2 is excellent. Its made of sturdy materials and feels very well-made. The screens are also very sharp and clear, and they have a wide viewing angle. One of the things I like most about the Maxfree T2 is how easy it is to use. It only requires one cable to connect to your laptop. Installing the software for the monitor extender is super easy and only takes a few seconds. After installing the correct driver (just choose the one for your operating system), youre good to go. The Maxfree T2 is also very lightweight, so its easy to carry around with you. I anticipate taking it with me often when I travel, so I can have extra screens to work on while Im on the road. Overall, Im really happy with the Maxfree T2. Its a great way to add two extra screens to your laptop, and its a good value (if you consider the convenience and ease of use it provides.) I highly recommend it. Here are some other things I like about the Maxfree T2: It has a built-in stand, so you dont need to buy a separate one. It comes with a carrying case, so you can easily take it with you wherever you go. If youre looking for a great way to add extra screen real estate to your laptop, I highly recommend the Maxfree T2 for your laptop. Its a great value for the price, and its sure to make your life easier.

The 13.3 1080P FHD dual screen is incredibly clear and bright, making extended work sessions much more bearable. The USB-A/Type-C laptop attachable monitor extender for Mac/Windows support M1/M2 chip MacBook monitor for 13.3 to 16.5 laptops is also an awesome feature, allowing me to move my laptop around without having to unplug the monitor. Setup was relatively easy and the adjustable angle and size helps me find the perfect viewing angle. Im very impressed with this product

Short version: this does work on macOS over a single cable, it uses Silicon Motions Instant View (its basically display output over USB, and is similar to DisplayLink) so it does need a driver for it to work. I was able to test this with a 2016 Macbook Pro 15 and a 2016 Dell XPS 13; this thing is too large for 13in laptops, but 14in should be okay. It includes a microSD card reader that out of the box comes with a small microSD card that contains the Instant View drivers. The display themselves are okay for 1080p60hz, just keep in mind the angles I have in the picture is as far as they will go towards the keyboard. I wouldnt call this thing portable however, it takes some time to deploy and honestly just get a larger (16in 4k) portable monitor and save yourself some money while youre at it Long version: I got this since I was expecting to be more on-the-go for work, and I always need extra screen space. I was aware that it would use Silicon Motions Instant View for macOS compatibility over a single cable (macOS doesnt support Displayport MST, which means that it needs software solutions to support 2 displays over a single cable; in this case, Instant View is a competing implementation similar to how DisplayLink works, which is display output over USB). The build quality is good. The whole thing comes with a faux leather wrap, and the plastic itself despite feeling a bit light, doesnt feel too flimsy with a pretty durable ratchet to adjust width. This thing is too big for a 13in laptop like the 2016 Dell XPS 13 I tested this with, but for 14in laptops and larger it should have no problems; the 2016 15in Macbook Pro has no problems. Theres a small stand that leans on the back because otherwise any laptop (except something like a super heavy mobile workstation/gaming laptop) would tip over from the weight. The viewing angles actually work okay, but doesnt lean together towards the keyboard too much. In terms of practical use, it aint good. Its very cumbersome to deploy, and youre only getting 2 small 1080p displays. In comparison, you can just get a 15in or 16in portable monitor and just have an easier time; this is actually what I was using before (I have a 16in 16:10 4k portable monitor), and in fact it is far more easier to use and is far more portable than this thing. Maybe say if youre always going to different places but sit at a single spot in the place for an extended period of time, maybe this will work, because setting it up and then packing it up is quite the task. It does come with 2 USB-C to USB-C (one end is 90-degree angled) cable, a USB-C to USB-A cable, and a 5V3A charger; this is for if youre connecting to a laptop over the USB-A cable, or if the USB-C port on the host laptop doesnt provide enough power for the 2 displays. Because this uses Instant View, it doesnt count towards a GPUs supported number of displays count. So say if youre connecting this to a M1 Macbook Air thats normally limited to a single display output, you can use this, and then still have that 1 display output for something else. This also means that for Macbooks with dGPUs, because the display output is over USB instead of DisplayPort, it doesnt activate the dGPU (which might have some power savings advantages despite having to run the Instant View drivers) The price of this is quite an issue. At the time of this review, its $600 with a $100 discount. A 16in 4k monitor can be had for around $200 to $250; you can get 2 of those for the price of this thing. Its not very easy to pack/unpack, its quite heavy, the size is awkward to carry around in a backpack (its very square). However by using Instant View, you can use this in macOS with a single cable. If I remember these dual-monitor laptop things are subject to some lawsuits on the original manufacturer that created the design, so to some extent I also doubt the legitimacy of this product. At the end of the day, it has its flaws, but it does work. Just keep in mind of your use case, a portable monitor is probably 99% of the time a superior solution and a better use for your money.

My scale is not working so I cannot to tell you the weight but certainly is heavier than my laptop, bulky, cumbersome and overall, is not portable. If is not portable what is the point of getting it? The concept is good but this is a poorly execution. Not recommended.

Ive been using the Maxfree T2 Triple Portable Monitor for Laptop for only a short while, but Im already really impressed with it. Its a great way to add two extra screens to your laptop, and its much more convenient than buying a second (or third) monitor. The build quality of the Maxfree T2 is excellent. Its made of sturdy materials and feels very well-made. The screens are also very sharp and clear, and they have a wide viewing angle. One of the things I like most about the Maxfree T2 is how easy it is to use. It only requires one cable to connect to your laptop. Installing the software for the monitor extender is super easy and only takes a few seconds. After installing the correct driver (just choose the one for your operating system), youre good to go. The Maxfree T2 is also very lightweight, so its easy to carry around with you. I anticipate taking it with me often when I travel, so I can have extra screens to work on while Im on the road. Overall, Im really happy with the Maxfree T2. Its a great way to add two extra screens to your laptop, and its a good value (if you consider the convenience and ease of use it provides.) I highly recommend it. Here are some other things I like about the Maxfree T2: It has a built-in stand, so you dont need to buy a separate one. It comes with a carrying case, so you can easily take it with you wherever you go. If youre looking for a great way to add extra screen real estate to your laptop, I highly recommend the Maxfree T2 for your laptop. Its a great value for the price, and its sure to make your life easier.

This thing is awesome!! I installed it and since I had a true usb-c port the pc powered it just fine. The drivers even automatically installed when I turned the pc on. The resolution is great and the screens are way beyond anything I could have imagined. I love it. There is, however, one caveat. It appears they put so much effort into designing the most awesome monitor attachment ever made, then just went totally generic on the stand that helps hold the monitor up. I mean seriously you just pull it out and spin it a little to lock it. In my first 5 minutes of using it I had to reposition the kickstand twice. I finally used a piece of tape to hold the little flap that keeps it from retracting in place so that I could get my work done. The designed such an awesome piece then crapped out on one of the most important aspects to an item of this nature.

If you are a traveler and you take gaming serious, or you are limited with work space? This double monitor will be ideal for you. Instead of having to buy two separate monitors and an arm that extends to each monitor, attach them to your desk or wall? Instead I use these. Easy to install for me, as plug and play was functional almost instantly. Great resolution and very portable. Not too heavy considering you are literally carrying two monitors. I love that they only require one cable plug in, instead of multiple cables for each monitor

This was packaged so “gorgeously” I was excited and wished I’d recorded myself. I didn’t know which item it was until I got to the package. It works well too once connected. I only have one drawback there’s no place to carry the cords. I know it seems simple but when you’re traveling it helps to store cords with their devices so I probably carry the whole box I might be heavier but I’ll stay organized and not leave a cord in the hotel or somewhere.