KOOKYE Lilypad LEDs Red/Yellow/White/Blue/Green (25x Lilypad LED) Wearable E-Textile Sewable Electronicsfor Arduino Rapsberry Pi Microcontroller Board

These will come attached but are very easy to break apart. Nice small design with good size pads for easy soldering. These have a built in 150 Ohm resistor (R) so they can be connected directly to a voltage supply.

I bought this set for my weaving project. They are working pretty good.

I bought these to add to a LilyPad kit I purchased. They work great and are a decent price compared to others I looked at. My daughters and I used them to make light up masks.

I like these. Theyre small and easy to incorporate into all kinds of projects. They are clearly labeled with the appropriate color on the back, since they all look the same when not powered on. All of the colors (my set included red, green, blue, white, and yellow) are bright even at lower voltages. Unfortunately they dont come with any data or documentation, but after a little searching it looks like these are 5v components (although I tested at 3.3v and theyre still bright at that voltage).

Vienen pegados y es complicado separar los leds ...

These are a good bargain LED to use with conductive thread like that in LilyPad kits. These are not as good as the Lilypad LEDs, but they work well enough. I tend to use a couple extra loops of thread through the holes on these LEDs before continuing the circuit stitching to ensure a good connection to the conductive area and not have any problem lights. I also test each light before using it in a project to avoid headaches.

Im working on a couple of different Lilypad LED projects - a hat and a vest. These are priced right, bright and easy to use. For clothing, conductive thread is the best bet. Im used to the more traditional old-school - use thin wire, solder it to the LEDs and sew the wires in a few spots to keep it in place and pull them through hems and along seams. Conductive thread makes this so much easier. These light up between 2.5 and 5.5 volts (5.5 is the max for Lilypad .) That means that you can power these manually via a USB battery pack.

All working out of the box. Nice set of lilypad leds. Voltage is 3 volts. Decent soldering on all of them.

A nice selection of colors. I use these for costume clothing. The built in resistor allows you to work with AA batteries.

These worked (I used them for a STEAM class for elementary school) although I’ll note that some of the colors are more vibrant than others.