INTELLIMADE, Acrylic Sheet Plexiglass 12 x 12 Square Panel 1/8 (3mm) Thick, Cast Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft and Easy to Cut, 1-Pack, Clear

I couldnt find this anywhere! Used on an ikea frame that had glass but the glass made it too heavy and unsafe for my kids room!

Beautiful shiny black acrylic that cut so easy with a CNC cutter and can be used for so many different purposes would definitely recommend and use over and over.

Used to cover bottom of camper screen door so dog will not ruin screen. Pre drilled holes to install with no problem at all. Looks great. And was the perfect size for my door

Works good

Good quality! Much Better than I expected. I use as my tables cushion. Arrived packaged very well, no breakage or issues. Remembered to remove the protective film before using. After poll off the fim, very clear with no scratches. The broad is really sturdy, and I believe it is also pretty for a transparent panel. Strongly Recommond!

Item was of notable quality! Exceptionally tasteful packaging. Speedy delivery. Seller is excellent.

The sheets arrived well packed and in perfect condition. The clear protective film worked great. The sheets are scratch free! I use 3mm acrylic in my 40 watt laser cutter and usually have no issues. This brand has been incredibly hard. Far more passes to get it cut. I’ve never had this issue before. I decided to test cut a few other brands 3mm to make sure my laser was still aligned. It cut fine. Swapped to this and man…..it’s tough. This brands acrylic sheets also produces a lot more smoke than I normally see. Not sure why. Overall it’s a good product. For the price the size is average. I can recommend for a 40 watt laser, unless you have all day to cut one piece. If you aren’t planning to cut with the hobby level laser it’s probably a good acrylic! Definitely sturdy, well packed, good color saturation, slightly larger than most “12 inch” sheets

No scratches or marks. Perfectly clear

Flawless! I use these to protect my albums on both sides of the shelves. Not a scratch or mar on either of them. I have 3 at this point, and need 1 more to finish it up. You wouldnt know theyre there unless you get really close.

In searching for inexpensive yet sturdy and easy-to-clean material for my mini mill bed covers, found this 2 piece set of Plexi-glass to fit my need-Score! Plex is always easy to cut, sands, and polishes nicely for the end product. I attached pieces of 1/2 aluminum channel to the bottom areas to fit into the T-Slots of the mill bed. The Amazon 5/16 magnets were inserted in end milled holes on the bottom side of the rear sections for a bit of additional holding power. This simple addition allows me places to set tooling and other stock on the bed, without damage or falling into the T-slots. Clean-up is so fast and easy now, no swarf in the T-slots, simply vacuum it off and done. The small magnets additional advantage is the collection of steel swarf, again easier for cleanup. I left the paper on the top side to eliminate slippage of objects placed on the bed, not falling to the floor.