Gorilla Waterproof Caulk & Seal 100% Silicone Sealant, 10oz Cartridge, Clear (Pack of 1)
-
Maria
> 24 hourI did mess up the first tube. Did similar to first tube that exploded but when gel wouldn’t come out I tried twisting the top I cut. There is an inner seal! Poked some holes in and reattached tip. Hey it works. Seam I need is bigger but nothing comes out the back!!!! If you read and want to charge you may. Don’t think original was defective. Uses error!
-
Allison Smith
> 24 hourI had never personally caulked something before, and I think this was a great choice. It was easy to get out of the tube, simple to clean up, all i needed was my fingers, and it dries pretty quick. As of a few months, it is still holding up great after regular use and cleaning. I didnt prep the area with anything but cleaning it with alcohol.
-
Jim J.
> 24 hourGreat caulk for sealing around small gaps around pipes going through my foundation
-
Zito Family
> 24 hourThis is an excellent sealant. I’ve used a lot of caulks, and this is one that holds true to it’s stated cure time of 30 minutes, even in wet conditions. I used this to seal a few gaps on my porch because water was getting into the house through the brick of my mud room steps. This worked great. I used a standard caulk gun to apply it. The only negatives I will say is that it lays on pretty thick. Most clear caulks dry truly clear, this looks more like a thick glue so it isn’t the prettiest application. Also, it’s pretty slick — my porch got very slippery along the wood until I scraped away the excess. Overall, great.
-
Song Dong
> 24 hourIt worked well as it shall.
-
SW Florida Slick
> 24 hourWorked fine for me.
-
Georgie
> 24 hourGood choice.
-
Kitchen Guy
> 24 hourHave a cap over a truck bed that was aging and now leaking around one window. Several tubes later Im leak free. Any job like this a couple cheap putty tools makes it easier
-
Noel
> 24 hourIt’s a good product but there’s not much actually in it.
-
tig
> 24 hourI used this product on an outside roof sealing project. I wire brushed the surfaces, cleaned them with Acetone and brushed off any loose material. The caulk went on flawlessly and was easily sculpted with my fingers wearing light medical gloves. Id recommend it hands down.