Flexible Heat Resistant Silicone Rubber Sheeting, High Temp,Smooth Finish, Red 1/8 by 12 by 12 inch

I use this for hold my crappie jigs after I powder paint them.. I have to bake them most hang theirs upside down on oven rack..I took 2 pieces of aluminum angle drilled and tapped put this between them it holds my jigs upright so paint dont make jig like a conehead... works perfect look at my jigs on fb page Marks jigs

If youve ever used a brake pressure bleeder then you know youve got to have a perfect seal between the bleeder top and the master cylinder reservoir. Well, there are a number of master cylinder reservoirs out there (re: Wilwood) that no bleeder top exists for, and since many of the cars that come through our shop have Wilwood brake systems we decided to make our own custom bleeder top, and the silicone sheet was used to make the gasket. It works perfectly and since its silicone the brake fluid wont eat destroy it. I also liked the variety of size choices they had available, it made finding what we needed much easier.

Ive been using this now for about 6 months on my Cub Cadet (Kohler Engine) mower valve cover. You can only buy cork gaskets for some reason, and these motors are notorious for leaking oil at the valve cover. I cut a gasket out of this rubber and Ive been leak free since.

Well made product that works well for my application. 3 mils thick, very durable.

I have cut out and replaced nearly every gasket on my pellet stove with this product. The thickness and durability of this silicone aids in its ability to seal. It cleans easily with soapy water and when both surfaces are clean there is a slight adhesion affect. It definitely sticks to flat side plate covers when they are removed for cleaning. Removed, cleaned and reinstalled these gaskets at least 12 times this past winter. Besides some discoloration, they are no worse for the wear.

Needed to fabricate a stove Jack for Montana Elk hunt. This fit the bill! Extremely easy to cut with a utility knife. Kept the cutout and am using it for a hot pad in the kitchen. Works great!

Great product but it’s rolled defiantly hold that original shape not a big deal for fixed gaskets but for loss wax casting the gasket lays in place and this doesn’t do that well at first because it wants to curl back up..

Color was not as in the pic had to send back. More orange red.

Bought this pad to use to isolate the vibration on a Kubota RTV exhaust bracket(s). Seem to be holding up and no vibration or cracking yet. Wife took the rest and thats setting on the counter top next to stove.

I bought this because I didn’t want to spend a fortune for the sublimation pads needed to press slate. It worked! They turned out great.