Edge Supply Brand Maple 7/8 inch X 50 ft Roll Preglued, Wood Veneer Edge Banding, Iron on with Hot Melt Adhesive, Flexible Wood Tape Sanded to Perfection. Easy Application Wood Edging.
-
roy
> 24 hourThis banding match the color and grain of Maple Plywood without issue, even when treating with a stain and varnish. Would recommend to anyone.
-
Jessica Harris
> 24 hourIt bonds well but stained a different color than the rest of my maple.
-
Dino
> 24 hourIve done 1000s of feet of edge banding and this stuff is the best! The veneer is ever so slightly thicker than other (Rockler) edge banding and the wood is extremely high quality. It lays on better, adheres better and trims better than anything else Ive used. Im sold!
-
Renae Bertolero
> 24 hourIf you make anything using plywood, this is a MUST! Very professional results. Just pay attention to the edges and push down to ensure it’s adhered... you’ll see little bubbles where it’s not. Just use a regular household iron, worked great.
-
J. B. Marshall
> 24 hourHave not install yet due to change in plans. Seems to be a quality product similar to what I have used in the past.
-
wright bonte
> 24 hourWent on easy, dont use too much heat to start, back off a little from the highest setting on the iron. Might need a little sanding, took the stain. No instructions included in my product.
-
Bonnie
> 24 hourI used this product along with veneer sheeting to resurface an old desk. The attachment of the edge banding with an iron was very easy. I am very pleased with my resurfaced desk and this product.
-
R. Williams
> 24 hourI was concerned by the lack of brand options available in this type of product but tried this product based on its proliferation of its space. It is actually an excellent product that is surprisingly easy to use. It has an ideal thickness, the glue melts easily and adheres strong. The wood is quality and matches the hand selected specimens used in the remainder of my project. I will use this item again.
-
Jesse Alvarenga
> 24 hourGood
-
RS
> 24 hourI made a laptop stand out of plywood but needed something to cover the edges. I have never used edge banding before and this was great! It was easy to use with my normal iron. None of the banding glue got on the iron plate either. It made my cheap little stand look so much better! I cant believe I havent used this before.