EANOSIC Upcut Spiral Router Bits 1/4 inch Shank, 1/4 inch Cutting Diameter Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, Carving, Edge Trimming

Really nice bit. I have used quite a few of these eanosic bits and really like them. They cut well and last for many cuts.

This bit is nice and sharp, the flutes are large, and it is designed so it can plunge (not strictly a side cutting end mill). However, the plastic case it comes in isnt labeled and while there appears to be something on the bit itself - its very faint so much so to be unreadable. The large flutes I mentioned do make it pretty easy to quickly see its an upcut bit but Im picky with regards to this sort of thing. Item reviewed: EANOSIC Upcut Spiral Router Bits 1/4 inch Shank, 1/4 inch Cutting Diameter Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, Carving, Edge Trimming

This is a great bit for the price. I ordered the 1/4 shank upcut bit with a 1 cutting length and 2-1/2 overall bit length. This is one of my workhorses on the CNC for milling pockets. It is sharp and leaves a decent finish. It would have been nice to have a label on the case, but you can easily identify if it is an upcut or downcut by spinning it in your fingers and watching the flutes. I will be buying more from this brand.

Did a nice cut on medium steel. Even though it’s a two flute cutter the surface finish was very smooth. The cut was 1/4” wide. Two glued cutters generally provide faster cutting at the expense of smoothness, so I would test on any material you intend to cut. Out of the box this tool is sharp.

This carbide bit has mirror-like ground surfaces. Its amazingly sharp, enough that you need to be careful when handling it. Deep spiral flutes for amazing chip removal. Center cutting, so you can plunge with it. Side cuts are extremely smooth. Like most center cutting bits, the bottom of a slot is not shiny smooth like side cuts, but is perfectly flat with sharp corners. Comes in a standard industrial type bit box for protection.

This bit has a super sharp 1 inch long cutting portion. The part of the shank that is not fluted is a bit longer than another similar bit I own and that will be perfect for deeper cuts when the shorter bit is too short. It cut smoothly with a flat bottom to the cut. It is fairly priced and should hold up well. Time will tell.

I got this to provide some relief cuts for my Matchfit dovetail bit. It has cut through several different materials including hardwoods and plywood. Its done a great job of make nice clean cuts fairly quickly. It expels the dust from the groove quite efficiently. Definitely a solid choice.

Very sharp spiral bit! Ive wanted an up cut style one for my router for a while now and they definitely seem to cut cleaner than normal styles. I use this with my hand router mainly on MDF and plywood which is usually pretty hard on bits due to the glue content. This has been working great for quite a few boards now and still seems quite sharp!

Amazingly good product. Absolutely satisfied. Thanks!

This is a good quality upcut router bit. The bit is nice and sharp and spins perfectly in my palm router. (in my CNC). The bit comes in a standard bit tube and stores nicely along side your other bits. I have used this bit only once, but I have the same sized EANOSIC downcut bit that I have been using for months now and its cuts and quality are still very nice. So I am expecting the same from this upcut bit. I am very happy with this bit.