DLJZGC 2PCS Dual Head Nail Setter and Hinge Pin Punch Set, Hammerless Spring Nail Set with 1/32IN & 1/16IN Heads, Ultra high 5000 PSI Striking Force Door Hinge Pin Removal Tool

(0 reviews)

Price
$10.96

Quantity
(10000 available )

Total Price
Share
30 Ratings
20
7
2
0
1
Reviews
  • Yambobo

    > 3 day

    I have a set of various sized nail setters that have seen a lot of use over the years, but have never seen a spring-loaded setter until I saw this set. At first, I decided against ordering it... just couldn’t see how it would work... but decided to give it a chance. After playing around with it for a while, it won’t replace my old school nail setters, but there are applications where this is a very handy tool to have on hand. It does deliver more force than I expected. Additionally, you get the hinge pin removal tool, which actually does a decent job and reduces the risk of damaging a door with an errant hammer tap. For the price, there is no excuse for not adding this to your tool kit.

  • Fred Garvin

    Greater than one week

    If youve never used one of these youre missing out. I recommend this to anyone that needs to remove a stubborn door hinge pin. In the past I used a hammer and chisel or a screwdriver to remove pins and I was always worried I would mar the hinge or door. These are the perfect replacement, no more marring! Be careful these things can really move the hinge pin and knock it completely out. I just use it to loosen the pins, I dont want the pin messing up the carpet... Great little tool that does the job.

  • Billy

    > 3 day

    Not to easy to use in tight spots

  • Robin M.

    > 3 day

    I liked the concept of this style of nail set in theory would be slightly more comfortable and efficeint than the traditional style but in reality i find it to be quite the opposite. Less comfortable to use in the hand and functions the same or less efficently than your traditional nail set.

  • L. Brown

    > 3 day

    Positives: Priced affordably enough that even a casual DIYer should get one. The nail set does a decent job setting small nails and staying on the head. The hinge pin driver also does a pretty good job of knocking the door hinge pins loose. This is a well priced and functional set for most people’s toolbox. Less positive/things to consider:I also own a nail set/hinge pin driver made by Ares. There is a clear difference in the two sets. Aside from the slight difference in length, (see second picture) the Ares set feels noticeably heavier. Obviously, in a spring punch set, extra weight is extra force on impact. For most people, probably not a big deal, but if you are doing it all day, one strike is better than two. The slightly longer length also make the Ares a little easier to handle, but again, only significant if you use it a lot. The second thing I was less than thrilled with was the actual design of the grooves. They are milled out straight grooves, which means you are pulling on and sliding a fairly rigid edge when you pull and release against those grooves, they aren’t rounded or smoothed out at all. This makes for a good gripping edge, but it could get rather abrasive in a hurry on your finger pads if you have to use them for an extended period of time. Takeaway: Very decent set for most DIYer toolboxes. Not as heavy or refined as some others (Ares), but at 1/3 the price, they are a much more budget friendly option for most people, and still do the job just fine.

  • Roger Baxter

    > 3 day

    I’ve never been good at using the old fashioned type of nail set - steadily hold the point of the punch on the exposed finish nail head with one hand and then tap the punch gently, but firmly, with a hammer held in my other hand. It seems that about every third strike of my hammer happens just as I allow the punch to slip off the nail head … and so I end up with a hole gouged in my work piece right beside the nail head that is still sticking up out of the surrounding surface. Bummer! So when I discovered this spring loaded nail punch I decided to give it a try. The result of my first test is shown in my photos. I short 3 nails into a scrap 3/4” thick board. Two of the nails were slightly proud of the surface and the middle one was just flush. If I were painting this, all three would need to be set slightly down into the surface and filled with putty or filler. Using the spring loaded punch I struck each nail head about 3-4 times as I learned how to use the new type of nail set device. I managed to get the left two set down just below the surface (as desired), but on the far right one I let the punch slip off the nail head and wound up with a divot beside the nail. So although the process seemed strange (since it was my first attempt), this spring loaded nail punch did accomplish its task just as good as the old fashioned type … 2 out of 3 were set nicely … and the third managed to get an extra hole beside the nail head that will need to be filled along with the nail hole. Hopefully I can improve my ratio of good hits with additional practice. As for the door hinge pin removal tool which is included in this set of 2 punches, although I didn’t test it, I think it would perform its task very well and without any risk of scarring a door with a hammer knocking out the hinge pin using a standard punch.

  • M Thorsen

    > 3 day

    These things work great! I love the variety between the different heads so you can find just the right one. I had some framing nails that were poking up through the top of my banister and this hammered them home quite easily! Now I have to fill and paint the holes but thats to be expected. They are easy to hold onto and easy to use, even kind of fun. Im actively looking for nails that needs to be hammered away at haha. Recommend without reservation

  • G R

    > 3 day

    Always good to have a pair of these in your toolbox. They work well for their intended purpose though the impact force is not as strong as I expected it to be. These also have straight ridges, instead of rounded ones, and will start to chafe your fingers if you need to use them for a sustained amount of time. I have a few other name-brand punches that are better but for the overall value, I can’t really complain.

  • Joey Joe

    > 3 day

    I love these things! No hammer needed, keep it in your apron or pocket, pull it out to set nails quickly without having to carry a hammer on odd jobs. Not having to use a hammer with these is the primary advantage, but also, it is good in a tight or delicate spaces when missing the punch, or misjudging the strength with which to hit the punch could be disastrous. This product will save you from both short-comings. Some contractors think they are silly or a gimmick, but they really do work! You hold one end of the punch directly onto the nail head, pull out the other end then let go; a direct hit every time! Ive used other brands of these before and these seem to be totally up to par with those ones, and maybe even better! These are nickel coated, so I think they are going to resist rust better than the ones Ive used in the past. This set has the ideal array of nose & tip styles to handle most nail setting tasks from start to finish on a house construction site. I really like the straight hinge punch tip, its very multipurpose and can reach deep down to set nails without risk of widening the hole. This is a great set to have on hand, even if you already have traditional nail sets (they each have their advantages)!

  • ekjb66

    > 3 day

    Love them work graat

Related products

Shop
( 793 reviews )
Top Selling Products