D&D PowerDrive ORB-H-1101 Cub Cadet MTD 754-0461 954-0461 Kevlar Replacement Belt, 1/2 x 78, 4LK Section, Rubber

Belt went on fine didnt have any trouble with elec. clutch came right off, drive pulley slide down so I didnt have to bend tabs. I got the Kevlar belt so hopefully I wont have to change it again. 2006 Cub Cadet LT 1550 350 Hours om OME

I have used the D&D power drive belts for a few years now on deck drive and wheel drive applications. With that being said, I have never had one of them fly apart. Installed properly the belt will last a long time. Installing the drive belt is suggested in the owners manual that you have a professional do the work, Im no professional! What you need to do is drop mower deck and remove. Raise front of tractor and use jack stands or similar for bracing. You will need a 1/2 breaker bar or impact and a 15 inch adjustable wrench to remove blade clutch off of crankshaft. Place wrench on double flats just above bolt head in shaft. Use breaker bar or impact to remove bolt and clutch assembly. You may need two sets of hands for this. Replace drive belt in same configuration it came off. There is a picture in manaual that should show routing of belt around idler pulleys in middle of frame. When placing clutch assembly on shaft it helps to feed belt on to pulley at same time. DO NOT re-tighten bolt with impact, use a torque wrench and torque bolt 36 to 50 foot pounds. I went down the middle on specification. Reinstall deck, done!

ok

Nice fit. Good quality

Good quality

2008 Cub Cadet 1000 series tractor. Worked as advertised. Fit according to specifications. Would order again.

Quality belt. I’ll be buying more of my mower belts for D&D

its is easy to install

Looks good, perfect fit.

Quality product, exact fit.