Cooler Master MasterBox TD500 Mesh Airflow ATX Mid-Tower with Polygonal Mesh Front Panel, Crystalline Tempered Glass, E-ATX up to 10.5, Three 120mm ARGB Lighting Fans

(0 reviews)

Price
$98.27

Color
Quantity
(20000 available )

Total Price
Share
905 Ratings
601
160
69
34
41
Reviews
  • Morgan McFord

    > 3 day

    got the case, it is as you expect - a great looking case with 3 okay fans.

  • Camille M.

    > 3 day

    Impeccable, expédition rapide, colis sans bosses.

  • C. Okamuro

    > 3 day

    I had an old Cooler Master Centurion 690 that I tried to re-use in a newer build. The system consists of an X570 board, a 3900X, a GTX1080, and a GTX2060 Super. Since its a production box mainly used for compute, its frequently at 100%, drawing 500 watts. While the old Centurion technically worked, it needed too many fans (and made too much noise) to be practical. The search was on for a newer high airflow case! While I wanted to get a Phanteks case, I decided on the Cooler Master MasterBox TD500 Mesh Black ARGB (MCB-D500D-KGNN-S01) instead. It came down to looks (subjective) and price.

  • zombieNR

    > 3 day

    Tiene mucha ventilación, viene con tres ventiladores ARGB. Yo le he instalado 4 ventiladores ARGB (3 en la parte superior y 1 en la parte trasera).

  • Raju Bajracharya

    Greater than one week

    My motherboard (Asus Z270) only had a 4 pin RGB header which did not connect with the wires for the fans which I meant I had to use a sata cable to connect it, however my power bank didnt have enough sata which was really annoying and I was forced to get and use another powerbank. Other than that, the case was really nice to work with.

  • Juan Manuel Flores

    > 3 day

    Es un excelente gabinete.

  • Collin

    > 3 day

    Case is either too shallow or too short to fit a 280mm rad on in the top of the case. This may work better with motherboards with smaller heat sinks. I am using a x570 aorus master and in the top mount the rad hits the motherboard heat sinks. I was able to force it in but I could only get the front couple screws in, it is contacting the motherboard and at a bit of an angle. In hindsight, I should of got a 360mm rad. Other then that, this case is really nice. Its light and sturdy. The glass and and front mesh look great.

  • G Dawkins

    > 3 day

    Good product

  • José Francisco García Vite

    > 3 day

    Sus luces RGB y lo silencioso que son los ventiladores le da un aspecto visual increible y el color blanco es hermoso

  • Brian Shoup

    Greater than one week

    Great part placement, and great cooling, with durable material. Very well built.

The E-ATX MasterBox TD500 Mesh takes airflow performance and turns it into an art form. Powered by three pre-installed ARGB fans, airflow is fed through a geometric, three-dimensional mesh front panel into a system viewed from a crystal-clear tempered glass side panel. The Crystalline Tempered Glass side panel is precision engineered for both its toughness and its aesthetics through CNC machining. Polygonal Mesh takes its form from Cooler Masters Fine Mesh technology, simultaneously providing high airflow, dust filtration, and a strengthened structure. With advanced technology set firmly into fine art, the MasterBox TD500 Mesh Black carves its own path to the bleeding edge.

Related products

Shop
LCK your love shop
LCK your love shop
( 999 reviews )
Visit Store
Top Selling Products