ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Joseph Watkins
> 3 dayThis stuff is amazing. I took my CPU heatsink off by accident while cleaning it. I noticed that I had apparently neglected to put thermal paste on properly, so I ordered this. My CPU went from idling temps in the 60C range, and up to 80C while gaming, to 30C while idle and 45C while gaming.
-
Don W
> 3 dayA very petite tube gives the operator better control of where the paste goes. Very ready to use, dried a little slower than i thought out would
-
KrsnamVJm
> 3 dayTotally worth spending a few extra bucks
-
Gabor
> 3 dayI bought this for my new CPU cooler, it was easy to apply and spread with the provided spatula. The paste has good consistency and is probably going to be enough for years. My i7 with the stock cooler was running 85-90C under load, with the new cooler and this thermal paste it down to 50C. Its definitely worth buying.
-
Reiko Gavin
> 3 dayThe paste came in on time and is an extremely great paste for the value. I still have plenty of paste left over after the pc build.
-
Sean Green
> 3 dayPerfect
-
Joanie
> 3 dayIts ok thank you
-
TheWayOfShawn
> 3 daySolid quality product. Wouldnt recommend any other.
-
FemboySlayer00
> 3 dayPremettendo che ne faccio uso prevalentemente su vecchi computer devo dire che si nota comunque lalta efficenza nella conduzione di calore di questa pasta termica, facile da applicare e con buona distribuzione con la semplice pressione del dissipatore premuto sopra.
-
Island Bond
> 3 dayAwesome product! CPU temps remain between 40 and 53 degrees Celcius.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
