ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Francis
> 24 houreasy to apply
-
GeekBorn
> 24 hourReplaced thermal compound on a MBP and it lowered the average temp by a solid 5C.
-
Cell A.
> 24 hourGreat product
-
Dirk
> 24 hourUsed it on my noisy PS4, so quiet now. Great buy
-
Andrew M.
> 24 hourgreat coverage easy to use
-
Riccardo
> 24 hourTrès bonne qualité, comme attendu.
-
Christopher
> 24 hourI ran out of this stuff last time and had to use some cheap thermal compound that kept my cpu temps high durring a stress test, this stuff dropped the temps on my cpu by 15F making it much cooler. I was running average around 175F now im at 160F thats with 100 percent CPU usage durring a stress test using CPU-z and monitoring temps using CPUID HWmonitor, this stuff is great quality compared to what I was using it didnt even have a name brand on it but it came with a cheap water cooling set. I did have a little trouble at first for some reason I had to keep moving the heatsink around to further thin out the layer i think i put to much but that was resolved after a few minutes of moving the heatsink around to spread the compound out more. you really dont need very much it prevented me from booting at all kept crashing untill it was the right amount. I tested this for 12 hours on one test and am half way through another 12 hour test while also stress testing the GPU to provide what heat that would add to the case while gaming. this is by no means a real world test obviously no one will be stressing a cpu 24/7... but this is just to make sure it remains stable and does not overheat at any point and shut off as It would be bad to have it overheat and fry a componant. also this I believe helps settle in the thermal compound. next up is the real world testing and that is gamming with max settings.
-
C. Mason
> 24 hourGenerally a very good thermal past at a very good price. Very easy to apply via syringe alone (you dont need to use the scraper).
-
Discman
> 24 hourRecently i did the 1-point dot in center method on my CPU when building my Pc. I got pretty decent cooling results but, when trying to game on MAX settings? I ran into over-heating issues. This time i redid my thermal paste and did the Full-surface spread. Much better! My CPU runs about 15c cooler than it did before. As for the ARCTIC MX-4? Its done its job well. My only gripe is the paste is a bit difficult to spread and took more time than i thought. Once youre done however, its Great! Plus the included tool to spread the paste with works well.
-
K S
> 24 hourUsing this for thermal paste replacement on PS3. This is the best quality thermal paste you can buy. Don’t look anywhere else!
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
