ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Joshua
> 3 dayLa use para cambiar la pasta vieja de un core i7 de segunda generación, nada excéntrico. Este procesador antes del cambio tenía la pasta toda seca y sólo contaba con el disipador stock, por lo que hacía thermal throttling a cada rato.
-
MrJohnSir
Greater than one weekGrwat did the job easy to use and does as described.. My suggestion is to use pea size amount on cpu or gpu and let spread with pressure method.. YouTube if unsure
-
Gabriele V.
> 3 dayCome pasta termica è ottima. Lho usata su un laptop con i7-7700HQ e una GTX 1050Ti.
-
Andrew O.
> 3 dayGreat product! Reduced my temps by 25 Celsius when gaming, with my new air cooler
-
Timo Labsch
> 3 dayDer Preis ist gut und deswegen empfehle ich das weiter
-
Sresthaa
> 3 dayThe paste performance is good for desktops than laptops. My laptop seemed fine for a week but due to the high temps it dried up more quickly. I applied same in desktop and it works like a charm. This is not good for laptops or anything which goes for more than 80 degrees. It bought down my temps on predator Helios 300 2018 edition significantly from 95-99 to about 80-85 but it dries out quickly. After I shifted to kryonaut it never crossed 75 mark and on idle it is on 30-35 degrees at an ambient room temperature of 25-28 degrees and its long time now since I applied it. If you need a paste for gaming laptop go for high end thermal solution like liquid metal or kryonaut paste which can still stay good at high temps of laptop. Its perfectly fine for a desktop.
-
Gurpreethira
> 3 dayNoticed the other day my CPU (i7-4770k - OC to 4.5) temps were crazy high during load (190-212f; temp throttling) i have a AIO liquid cooler installed on it. I thought the water pump had died because the fans were on mediuim at best.
-
Matt
> 3 daymy pc was running at 50degrees idle, seemed a bit high with only having cpu cooler and 1 case fan, bought this and the temp dropped by 5-10 degrees on idle, after changing fan settings, it dropped to the low 30s in temp. does what i needed it too, will buy again if / when i run out
-
Manu
> 3 dayMe ha parecido una maravilla. Lo he aplicado en dos portátiles antiguos y en uno que se calentaba mucho ha bajado la temperatura más de 15°.
-
Carlos pp
> 3 dayExcelente pasta termica, vale completamente lo que cuesta, se nota el cambio de temperatura y es muy facil de aplicar.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
