ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Max
> 3 dayArtic siempre se ha distinguido por ser una de las mejores proveedoras de pasta térmica en el mercado y este modelo es uno de sus mejores en cuando a calidad-precio se refiere. Mejora considerablemente el enfriamiento de los procesadores.
-
Paul C.
> 3 dayTrès bon rapport qualité prix pour cette pâte thermique.
-
Pier
> 3 dayAvevo necessità di fare un po di pulizia interna, sostituire la pasta terminca e mettere una ventola nuova. Ho trovato questa pasta termica molto utile, aveva una ottima adesione e sono rimasto soddisfatto.
-
Bastien
> 3 dayJe recommande ! Celà fait plusieurs fois que jachete cette pâte thermique pour mon pc et celui de mes clients !
-
Alex Ruda
> 3 dayCundo mucho, he usado para un procesador de PC y con lo que sobra tengo para varios más. He comprobado 5° menos, ahora va por 38-40 antes 43-47 en AMD
-
Gaurav verma
> 3 dayIt’s a very good product and i used in my cpu and it’s doing prefect job i am very happy ..
-
Matt M
> 3 dayBought this to replace corsair tm30 thermal paste on my 5700xt gpu. Installed NZXT Kraken G12 with Corsair H55 AIO cooler. Long story short I re-seated the heat sink 4 different times but junction temps remained at 110c. Replaced the MX4 with corsair tm30 and temps went down to 95c for junction temps. This stuff kept junctions temps 15c hotter than corsair tm30. I do not recommend this product.
-
Hugh F. Mitchell
> 3 dayI used to be firmly in the camp of any paste will do when it came to fitting CPUs or re-pasting GPUs etc, however, having suffered some alarming temperatures with my R9 280x GPU causing it to thermal throttle while running FURMARK stress test, I decided to take some action. I cleaned off the dust and added some generic cheap HY-521 paste I had lying about, while my temperatures dropped, I was still sitting around 50 degrees Celsius at idle which to me is still quite high. I decided to follow numerous recommendations and bought the MX-4 for a little over £5. Once arrived and pasted, my GPU is now sitting at idle around 38-40 degrees which is a big difference, my GPU no longer sounds like a Hercules transport aircraft at full military power while gaming. It now sounds more like a cruising Cessna...... I kind of miss the noise, but my wife doesnt.........
-
Mikhail
> 3 dayexcellently
-
boschito
> 3 dayARCTIC MX-4 paste (4g) - Performance thermal paste for all processors (CPU, GPU)
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
