90 Pcs Wire Brushes Set, Rocaris Brass Wire Wheels Pen Brushes Set Kit Accessories for Rotary Tool
-
M. Hugo
> 24 hourAfter several minutes, the wires start to fall apart/off, propelled like little misses... make sure to wear protective goggles, ppe clothing, gloves
-
Jeremy Drew
> 24 hourThey work as you would expect. They do not last long especially under high speeds. Be aware that it is a good idea to have a ShopVac running close to the working surface. The bristles break off and can get stuck on everything including your skin.
-
Larry606
> 24 hourI was concerned about purchasing these even though I needed the ability to get into smaller places with my Dremel. They work well in tight spaces and in open spaces as well. You get plenty of each type of attachment at a good price. Thats a good thing because they have a tendency to wear down quickly. A bit too quickly as far as Im concerned. So, the number you get does seem to make up for how quickly they wear down.
-
Mike SC
> 24 hourA lot of parts. Works okay. Falls apart quickly when used in dremel, but work ok if using in a low speed tool like cordless drill or if you have a variable speed set to lowest setting. When using my dremel, I wound up picking the brass bristles out of my shirt and a few pieces in my skin, so be sure to wear a face shield and protective gear. At high speeds the bristles fly off like little arrows, and definitely not from Cupid.
-
Ian Ferguson
> 24 hourLess than zero. Each of the brushes lasted less time than it took to seat them. I was covered (hair, clothes, ears, etc.) in tiny razor sharp wires. They get everywhere. This product is garbage, pure crap. Do not hurt yourself with these things.
-
DPH
> 24 hourThey break down fast.
-
abe b
> 24 hourUsing in a Milwaukee dremel to clean the edge of maple burl. The wires fly out faster than a kid running away from the dentist. I went through nine to clean a two foot section of burl. You must wear safety glasses when in use and cover up as they like to fly directly into your face no matter what angle you hold them. Would not purchase again.
-
neil
> 24 hourCertainly inexpensive and in some ways an excellent deal. But, the wire disintegrated from the wheel quickly and you may be picking pointy slivers of metal out of your clothes and body afterwards. Running at lower speeds will extend their life but but ultimately they will still separate from the wheel and potentially end up requiring tweezers to remove them. Clean up well and try to keep anyone you care for from sitting near your work area. And offering to assist with tweezers will not improve their mood.
-
Oldbarger
> 24 hourA Dremel is too fast for these brushes, they open up. Work better in a regular drill at a lower speed.
-
Jewel Braun III
> 24 hourI kinda expected a box or something that had the brushes organized ! It was basically a zip lock bag with the brushes just cramped in on top of each other ! You will need like a little plastic or metal container to put them into. You cannot use this dinky little bag to store them. You would have to pour out the bag every time to try to find what you need to use. Has to be a better way to present them to consumers. *******. NOTICE : just used the brushes for the first time. Make SURE you wear safety glasses as well as long sleeve rubberized shirt and pants ! I was going to clean an old cast iron corn pan that has like little indented recesses and these brushes come apart slinging the wires everywhere with my Dremel tool. I have the wires imbedded in my skin and my clothes will have to be discarded. They are a hazard within itself. I used like 10 or more brushes and they do not do as I expected. . I think they should be removed as a safety hazard. One star is overrated. But is as low as you can post. A decent brush would be great but not this junk ! I thought at first was a great deal and if they had not come apart would have been. You cannot use over 5 minutes without all the wires gone. I hope Amazon reads this !