8mm OD 20mm Long Light Load Compression Mould Die Spring Yellow Compression Mould Die Spring for The Ender 3s Bed 20pcs

Everyone says to upgrade your springs to yellow springs on the 3D printer. So I ordered these and held onto them until I needed to level my bed. Then I did a quick spring install and leveled the bed. Have been working as designed for about a year now.

Immediately noticed the difference compared to stock springs. On an Ender 3 V2, it needed to be levelled every single print. I go many prints without needing to re-level. I am only really re-levelling now when I swap materials, or removing the build plate for cleaning etc.

I bought this for my Ender 3 Pro when I went to the three point leveling system. So far it is holding up pretty well, and after the first time(well times, you know it takes about 30 times to get the level right!)It seems to be maintaining the position well, and I havent had any issues with the new springs.

These helped keep the bed level for longer. I dont have to adjust it as often now.

Bought these springs as an upgrade for my Ender 3 after a recommendation. Nothing wrong with the springs, however, they have more coils than the springs that came on my Ender 3 so they wouldnt compress enough to be able to properly level the bed. So into the spare parts bin they go.

I got tired of leveling my hotbed nearly every time I printed something, so I picked these up to try them out. I still seem to be re-leveling my bed quite a bit when printing ABS (perhaps the hotter temps), but these seem to hold the bed level for quite awhile when I am printing with PLA. Definitely worth the few extra dollars to pick up this package to replace the stock springs if you have an Ender 3 v2 or like in my case, the Voxelab Aquila X2.

These works well on ender 3v2. It definitely made a difference in how long my bed stays level.

I only needed 4 of these, so I have a bunch extra. So if you drop a few, some are weird looking or want to throw some into the sun, you will still have enough. I ended up using them for some cool projects. Good quality.

Several prints in and I haven’t had to readjust the bed.

Big time , cheap and easy upgrade.