5 Pieces Polycarbonate Sheets Clear Plastic Sheet Thin Rigid Plastic Sheet Clear Polycarbonate Sheet Shatter Resistant Plastic Sheets for DIY Crafts Document Picture Frames (12 x 12 x 0.02 Inches)

I needed some Plexiglas equivalent to make a secondary windshield that would redirect the wind up when I raise my motorcycle original windshield. It needed to be thin as otherwise the screws that would hold it in place would no longer be aligned with the parts they belong to, and it needed to be resistant to withstand the wind pressure. The first part I had made was with a different material, too brittle. After a year of good service, it finally shattered on a 485 miles road trip. Enter this material. Easy to cut, very transparent, flexible and thin enough. Perfect. For MY job.

I almost returned them because of a cloudy surface but it was just the very thin protective film. Once that was removed the sheets are very clear and uniform. Perfect for dollhouse windows.

Excited to try this!

These are exactly as described and was exactly what I needed. I was a little hesitant to try them, seeing as how one reviewer said they werent clear. I had purchased polycarbonate film from another retailer (not Amazon) and those were described as clear, but when it arrived it was actually a velvet clear finish (which is a little cloudy) and it had no protective film on it, so I could see some fine scratches from storage and shipping. Thats not what I wanted. I needed absolute crystal clear. So I decided to try these. Bam!! exactly what I was looking for. Clear as glass after you pull off the protective film on each side and no scratches, thanks to the protective film. Perfect! Be aware....They are .020 (20 Thousandths) of an inch thick. Dont expect anything different. If youre not aware of how thick that is...get a set of calipers and look before you buy.

Exactly what I needed to repair my mom’s miniature green house.

If you are looking for a polycarbonate sheet that is like a standard to a heavy bond paper like thickness then this is for you. If you are looking for a stiffer more solid sheet that will can flat this is not the best solution.

I couldnt find a decent aftermarket lens for my Miller Classic welding helmet and the OEM is just to ridiculously expensive. While the OEM lens is thicker at 1mm, the inner lens is mostly just a dirt shield for the auto-darkening lens and is not a safety feature (thats my opinion). And because the material is so thin, it easily cuts on my paper cutter. You could just as easy use a pair of scissors too. And for $12, Ill probably never have to buy another inner lens. Sheets come with protective plastic on BOTH sides. One side is green and its obvious, but the other side is clear, so remember to peel that side off too!

polycarbonate sheets are large and can be easily cut.

we will see

The plastic claimed to be clear but was not at all clear. It definitely is cloudy.