#40 Roller Chain Connecting Links (5 Pack)

Its a standard #40 master link. Not a lot to say about it. It got my gokart up and running.

Maybe its me, but the snap-on pins (locking plates) these connectors use are all but impossible to get on or off. It seems to me they could have made the tolerances a little less tight (i.e. the part of the pin that is split should have a slight V-notch taken out rather than just a cut). I looked up YT videos to see how people managed to get them on. Most push them on with a flathead but I had zero luck with that. Trying to get purchase on any edges with needlenose was also a lesson in patience... and once a pair of channel locks placed just right did the job. But no method worked twice (had to make three chains) and I spent more time trying to get the pins snapped on than I did on the entire rest of the job. One pin took me nearly an hour. The connectors seem well made otherwise, and fit the #40 PGN chain, and Im confident they will never come off, but if I had to buy connectors again, Id look for pins that are made to be friendlier to get on/off before Id purchase these again.

It comes in a pack of 5 and it is made very cheep its Probably made out of Chinesmealem very cheep Metal snapped right off from my torque converter it happened to every one

Good master link replacement for a #40 chain.

Shaft length on these master links are about 1/16” shorter than the master links on my #40 atv chain. I was able to make them work after some hammering and grinding on the chain. Not ideal, but it worked.

Works, would buy again!

These work great

I would not recommend these. They are slightly larger than any other 40 chain master link. I have also already replaced 2 of them since the master clip seem to like to pop off leaving my chain to come off as well. Not very good quality.

Ive used these on mini bikes and they seem to work as they should . No issues as of yet or any complaints from people who purchased the mini bikes Ive used them on.

Worked on 40 chain