2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
KEITH
> 3 dayThis product does what it says it will, and does it very well. It is a very user friendly way to easily extend your wireless coverage. I am using a total of three of them and the performance is great.
-
PATRICIA
> 3 dayThis works great! It exceeds my expectations. Im in a room where I have trouble getting Wi-Fi and this device is able to capture it and I now have Wi-Fi all the time!
-
KIMBERLY
Greater than one weekMy base router has a speed of 114 Mbps and the extender wifi speed was 42 Mbps. So happy with this unit and the best part is I only need to use one unit for the whole house.
-
SANDRA
> 3 dayI was having trouble with wifi in my bedroom. This was a great solution. Now i have full signal and it was easy to set up as well!
-
REBECCA
> 3 dayGood Product , Easy configuration & make sure you are close to the main router box as this help you in a faster configuration with less delay signal time .
-
JERRY
> 3 dayMy routers downstairs and i put it upstairs and it works wonderfully, easy set up too with instructions.Works great, very easy to install and configure. Up and running in less than 15 mins
-
ALBERT
> 3 daySimple range extender that works great. I use it to extend wifi coverage in my gym and it works great. Within its the product categorys limitation (extenders limit throughput), its an excellent value product that gets the job done perfectly. Well built and designed.
-
olga torres
> 3 dayI needed to connect to a wifi garage door opener about 100 feet behind my home and this extender made it happen, actually it extended further than needed. Very happy with this product. This little extender has more power than the router it feeds from. I dont know how but my phone and laptop give it an excellent strength rating and my home base router a very best! Mine works great in a fairly large home with a lot of bends and turns
-
Tigro
> 3 dayRundum top
-
Beatrix Topalli
> 3 dayTop
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
